China Gold Copper Tin Ore Separation Jigger Machine - China Gold Copper Tin Ore Separation Jigger Ma Mining Equipment

Jigging machine or jigger is broadly used the pretreatment of bulky grain ore, similar to tungsten, copper, antimony, gold, manganese ore and other metal mine's mill run.


Application and efficiency
Jigging is likely one of the relative new methods for gravity concentration. As a rougher or cleaner gadget, it's widely utilized on the separation of gold, tin, tungsten, titanium, hematite, coal and different minerals due to its high processing capacity, giant range of separation dimension and simplicity of operation and maintenance.
A standard jig is mostly driven by eccentric circle, its jigging pulse curve is generally sine wave, the upward or downward stream rate generated by the diaphragm motion and motion time are virtually identical, subsequently, it isn't conductive to jigging bed dilation and stratification based on the proportion of mineral particles, and affects the sorting ratio and restoration of tools.
Saw-tooth wave jig is a vitality-saving gravity focus machine which is predicated on the standard jig in response to the distribution rule of jigging bed idea, its jig pulse curve likes the noticed-tooth waveform which makes the upward movement sooner than the downward; The upward movement time is brief, the downward is long, which overcomes the shortcoming of upward movement, downward move and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation results, then the heavy mineral particles within the ore are absolutely settlement, which enhances the sorting ratio and restoration of equipment. Compared with the sine-wave jig, the recovery of Sn will increase 3.01%, mold steel pipe W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; Water consumption is decreased by 30%-40%, site space is decreased 1/3, the stroke will be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping velocity could be adjusted endlessly. Its efficiency reaches the domestic advanced degree; It is certainly one of the perfect energy-saving gravity focus equipments.
Jigging Machine Advantages
1. Much softer movement pattern for significantly higher catch
2. If you have any kind of inquiries pertaining to where and just how to use structural steel (Docspal blog post), you could contact us at the web site. Smaller and lighter, making setup and placement easier
3. Multi-purpose
4. Other machines are sometimes too strong and injury the squid.
5. Metal gravity separation.
Feature
High capability
High focus ratio and excessive recovery
Fabricated with highest high quality materials
Easy to install, function and maintain
The pulsation curve is saw-tooth wave form facilitate heavy mineral to settling
Saving water 30-40% than odd jig
The pulsation pace very straightforward adjusted by regulator
Suitable for roughing and de-sliming
Can obtain good end in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone and so forth.
Jigging Machine Working Principle
Jigging machines are intended for gravity separation by methodology of jigging. They are used for preparation of coals, ores of ferrous and non-ferrous metals with excessive effectivity of separation.
Jigging machines are equipped with modern system of pneumatic drive due to which effectivity of separation is actually improved. Control system of jigging machine is intended for automatic management by strategy of jigging guaranteeing possibility of integration in control system of higher degree with entry to all technological parameters.
Jigging machine for washing sands of alluvial deposits: Jigging machines of the present class are designed according to module principle. In the heart of their design is mendacity module of jigging machines GRAVICON-4M.
Module is meant for washing sands of alluvial deposits and milled ores of non-ferrous metals of size as much as 25 mm with risk of mounting on dredges 250m3/h. Jigging machines in quantity of eleven pieces consisting of two modules have been installed on the Navoi (Uzbekistan) mining and beneficiation plant, where they efficiently function at current.