China Gold Copper Tin Ore Separation Jigger Machine - China Gold Copper Tin Ore Separation Jigger Ma Mining Equipment

Jigging machine or jigger is broadly used the pretreatment of bulky grain ore, similar to tungsten, copper, antimony, gold, manganese ore and different metallic mine's mill run.


Application and performance
Jigging is without doubt one of the relative new strategies for gravity focus. As a rougher or cleaner gadget, it's extensively applied on the separation of gold, mechanical steel tin, tungsten, titanium, hematite, coal and other minerals on account of its high processing capability, giant vary of separation measurement and simplicity of operation and maintenance.
A conventional jig is usually driven by eccentric circle, its jigging pulse curve is mostly sine wave, the upward or downward flow price generated by the diaphragm motion and motion time are almost same, subsequently, it's not conductive to jigging bed dilation and stratification in line with the proportion of mineral particles, and impacts the sorting ratio and recovery of equipment.
Saw-tooth wave jig is a vitality-saving gravity concentration machine which relies on the traditional jig in response to the distribution rule of jigging bed idea, its jig pulse curve likes the noticed-tooth waveform which makes the upward circulate sooner than the downward; The upward circulate time is short, the downward is long, which overcomes the shortcoming of upward stream, downward circulation and motion time produced by the sine-wave pulse curve, enhances the unfastened diploma of the mattress and alleviates the inhalation effects, then the heavy mineral particles in the ore are absolutely settlement, which enhances the sorting ratio and restoration of gear. Compared with the sine-wave jig, the restoration of Sn will increase 3.01%, W: 5.5%, seamless steel tube Pb: seamless steel tube price 1.63%, Zn: 2.04%, respectively; Water consumption is diminished by 30%-40%, site area is decreased 1/3, the stroke may be adjusted, dragging by the electromagnetic adjustable velocity motor makes the pumping velocity could be adjusted endlessly. Its performance reaches the home advanced degree; It is certainly one of the perfect vitality-saving gravity focus equipments.
Jigging Machine Advantages
1. Much softer motion pattern for considerably better catch
2. Smaller and lighter, making setup and placement simpler
3. Multi-function
4. Other machines are often too sturdy and damage the squid.
5. Metal gravity separation.
Feature
High capacity
High focus ratio and excessive restoration
Fabricated with highest quality materials
Easy to install, function and maintain
The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
Saving water 30-40% than abnormal jig
The pulsation speed very simple adjusted by regulator
Suitable for roughing and de-sliming
Can achieve good end in processing corresponding to placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone and so forth.
If you loved this write-up and you would like to get even more facts relating to seamless steel tube price kindly visit the web site. Jigging Machine Working Principle
Jigging machines are supposed for gravity separation by methodology of jigging. They are used for preparation of coals, ores of ferrous and non-ferrous metals with high efficiency of separation.
Jigging machines are outfitted with modern system of pneumatic drive because of which efficiency of separation is actually improved. Control system of jigging machine is intended for automatic control by means of jigging making certain chance of integration in control system of higher degree with entry to all technological parameters.
Jigging machine for washing sands of alluvial deposits: Jigging machines of the present class are designed in accordance with module principle. In the heart of their design is lying module of jigging machines GRAVICON-4M.
Module is meant for washing sands of alluvial deposits and milled ores of non-ferrous metals of size up to 25 mm with risk of mounting on dredges 250m3/h. Jigging machines in amount of eleven pieces consisting of two modules have been put in on the Navoi (Uzbekistan) mining and beneficiation plant, where they successfully function at present.